Got up early this morning and finished planing. Went to sanding for the kiln dried 2x4 center boards, but found that planing was far faster than the sanding, even with a 40 grit disc on the random orbit sander.
The end result of planing:
Once the planing was done, I laid out the locations for the head boards and foot boards as well as the pilot holes for the screws. Drilled out and countersunk all of the pilot holes in the post boards for the aforementioned head and foot boards and begun assembly.
Took a break between assembling end one and two to take the kiddo to the park.
Finished assembly of the two ends and contemplated putting off the rest. Finally decided that I was well on schedule and that spending time with the family was more important than getting ahead on the project.
No comments:
Post a Comment